Digital Oscilloscope 500MHz, 2 Channel,
with Probes: 2x RTM-ZP10 = Passive 500MHz Probe, 10:1, 10Mohms, 400Veff,
Option:
RTM-B1 = Mixed Signal Option, 400MHz / 2.5GS/s per channel, 16 channels
The Rohde & Schwarz RTM2052 is a Digital Oscilloscope with a bandwidth of 500 MHz and 2 channels. It meets the increased demands on bench oscilloscopes, providing time, frequency, protocol and logic analysis in a single box:
Time analysis: high sensitivity to detect signals that would otherwise be lost in the noise
Frequency analysis: fast reliable fault detection in the signal spectrum with integrated FFT
Logic analysis: 20 MSample with 5 Gsample/s for detailed analysis of digital signals
Protocol analysis: simple triggering and decoding of serial buses
The RTM oscilloscopes are ideal for many different apllications, including the development, production and servicing of embedded hardware.
Bandwidth: 500 MHz
Number of channels: 2
Sample rate: 2.5 GSa/s per channel, 5 GSa/s interleaved
Memory depth: 10 MSa per channel, 20 MSa interleaved
Rise time: 700 ps
High accuracy signals, right down to the details: 1mV/div
Deep memory, acquire long sequences
High time resolution, even for long sequences
Easy of use
Quick and reliable results during debugging and signal analysis
Debugging, everything at a glance (mask test, integrated FFT analysis, comprehensive triggering capabilities)
Analysis and measurement functions (QuickMeas): peak-to peak voltage, pos. peak, neg. peak, rise time, fall time, mean value, RMS value, time, frequency
31 automatic measurements functions
14 cursor measurments functions
20 waveform mathematics measurement functions
Serial protocols, easy triggering and decoding
Dimensions (WxHxD): 15.87 x 7.44 x 5.59 inch
Weight: 9.04 lb
Screen: 8.4 in. XGA TFT color display (1024 x 768 pixel)
Interfaces: 2 x USB host, USB device, LAN, GPIB (optional), DVI-D for external monitor
€ 5,690 (net) $7,169 (US)