Used Agilent 11970K for sale by AccuSource Electronics | used-line.com
SPECIAL OFFERS
Request Cart ({{ cartItems.length }})
Watchlist ({{ wishlist.length }})
Watchlist ({{ wishlist.length }})
HOME Test and Measurement Mixers Harmonic Mixers Agilent 11970K

Agilent 11970K

104 Visitors viewed AccuSource Electronics ads in the last 30 Days

Send Request
  • $95

Send to a Friend
Flag of USAEquipment Location: USA      
View Description>
Hide Description

Description of Agilent 11970K

Categories: Mixers, Harmonic Mixers

Manufacturer: Keysight Technologies (Agilent HP)

Model: 11970K

Condition: Used

Seller: AccuSource Electronics

HP / Agilent Agilent HP 11970K Waveguide Harmonic Mixer, 18.0 - 26.5 GHz

In stock
Condition: Reconditioned

Product specifications of Agilent 11970K (From Used-Line T&M Specifications)

The Agilent 11970K waveguide mixer is a general-purpose harmonic mixer employing a dual-diode design to achieve flat frequency response and low conversion loss. These are achieved without external dc bias or tuning stubs. Manual operation and computer-controlled hardware operation are simplified because mixer bias and tuning adjustment are not required.

The 11970 series of mixers has been designed for a local oscillator frequency of 3 to 6.1 GHz. Accurate absolute amplitude measurements can be made by using the conversion loss calibration chart of the mixer. The SWR of the waveguide input is typically 2.2:1 to further minimize measurement uncertainty. The combination of high gain-compression level and low conversion loss provides the maximum dynamic range for measuring input signals.

The 11970K extends the frequency range of the Agilent E4407B ESA-E series portable spectrum analyzer, the Agilent 8560 E-series portable spectrum analyzers, the Agilent 8566B spectrum analyzer (used with the Agilent 11975A amplifier), and the Agilent 70000 modular measurement system (used with the Agilent 70907A/B external mixer interface modules).

  • IF range: DC to 1300 MHz
  • Frequency range: 18 to 26.5 GHz
  • LO amplitude range: +14 to +18 dBm
  • LO harmonic number: 6-
  • Maximum CW RF input level: +20 dBm (100 mW)
  • Maximum peak pulse power: +24 dBm (250 mW)
  • Spectrum analyzer noise (1 kHz BW): -105 dBm
  • Typical gain compression: -3 dBm
  • Flat frequency response of ±1.9 dB
  • Low conversion loss of 24 dB maximum 
  • No bias or tuning adjustments
  • 100 mW safe input level
  • Rugged, and easy to use

View Similar Listings
Hide Similar Listings

About AccuSource Electronics

Logo of AccuSource Electronics
Send to a Friend

Recently Viewed Products

Wait! Don’t go yet!

You have {{cartItems.length}} items in your Request cart.
Would you like to send a Request to the Sellers before you leave?
Remind me later