Instek GDS-2304A 300MHz 4-Channel Visual Persistence Digital Storage Oscilloscope
Instek GDS-2304A 300MHz four channel Visual Persistence DSO provides 2GSa/s maximum real-time sampling rate and 100GSa/s high-speed equivalent-time sampling rate. Equipped with an 8-inch 800x600 high-resolution TFT LCD display, 1mV/div to 10V/div vertical range and 1ns/div to 100s/div time base, the Instek GDS2304A is able to faithfully display waveforms of complicated and obscure signals.
With 2Mega point record length, Waveform Search, and Segmented Memory functions as standard features, events of interest can be captured and saved into the Segmented Memory, which can be divided into 2048 sections for observation, whilst irrelevant waveforms can be ignored. Consequently, the overall efficiency of memory usage can be enhanced. Under Waveform Search mode, after the input signal is triggered, the GDS-2304A is able to Search and Mark the waveform sections, which comply with user-defined search condition and threshold level within the whole memory. With Zoom window and Play/Pause button to scroll through whole displayed waveform, the user can rapidly navigate all the waveforms efficiently.
The ping-pong waveform acquisition design and the advanced VPO-technology-based waveform procession system greatly enhance the speed and the quality of waveform display at a very fast update rate of 80,000 waveforms per second.
The optional logic analyzer function allows the signal acquisition through logic triggering and enables the logic waveforms and the analog waveforms to be shown on the same screen for comparison and time correlation analysis. This Mixed Signal Oscilloscope function is field-installable with a plug-in module, containing either 8 or 16 input channels, at the rear panel. The MSO function supports the IC/SPI/UART serial bus trigger and decoding.
RS-232C interface, USB ports, and Go/NO-Go output are provided as standard, with Ethernet port, SVGA video output, and GPIB port available optionally.