Used Gigatronics 6060A for sale by Valuetronics International Inc | used-line.com
SPECIAL OFFERS
Request Cart (0)
Watchlist (0)
Watchlist (0)
HOME Test and Measurement Generators RF Generators Fluke 6060A For Sale Gigatronics 6060A

Gigatronics 6060A

211 Visitors viewed Valuetronics International Inc ads in the last 30 Days

Send Request
Gigatronics 6060A

 Add to request cart
Send to a Friend
Flag of USAEquipment Location: USA      
View Description>
Hide Description

Description of Gigatronics 6060A

Categories: Generators, RF Generators

Model: 6060A

Condition: Used

Seller: Valuetronics International Inc

Gigatronics 6060A The 6060A is a 520 MHz RF Generator from Gigatronics. An RF generator

The 6060A is a 520 MHz RF Generator from Gigatronics. An RF generator is a tool engineers use to generate sinusoidal outputs while testing electronic equipment. The output will automatically have its frequency varied or swept between frequencies. A “sweep” is one complete cycle of a frequency variation. Engineers use RF signal generators as test equipment, mostly to measure responses of filters, amplifiers, and electrical components.

Product specifications of Gigatronics 6060A (From Used-Line T&M Specifications)

  • Launch Date
  • Status Discontinued by Manufacturer

The Fluke 6060A is a fully programmable, precision, synthesized signal generator. It is designed for applications that require good modulation, frequency accuracy, and output level performance with moderate spectral purity. It is well suited for testing a wide variety of RF components and systems including filter, amplifiers, mixers, and radios, particularly on-channel radio testing.

  • 0.1 MHz to 1050 MHz frequency range, synthesized from a 10 MHz reference, and with an output resolution of 10 Hz
  • Amplitude
    • level range: +13 to -137 dBm in 0.1 dB steps
    • Resolution: 0.1 dB
    • Source SWR: <1.5 below 1 dBm and at or above 0.4 MHz; <2.0 elsewhere
  • Spectral purity (CW only)
    • Spurious: <-60 dBc for offsets greater than 10 kHz. Fixed frequency spurs are <-60 dBc or <-140 dBm, whichever is larger
    • Harmonics: <-30 dBc
    • Residual FM (rms in 0.3 kHz to 3 kHz band): <13 Hz for 245 MHz to 512 MHz; <27 Hz elsewhere
    • Residual FM (rms in 0.05 kHz to 15 kHz band): <30 Hz for 245 MHz to 512 MHz; <60 Hz elsewhere
    • Residual AM (0.05 kHz to 15 kHz band): <-60 dBc
  • Internal 400 Hz and 1000 Hz modulation oscillator
  • Amplitude modulation
    • Depth range: 0 to 99%
    • Resolution: 1 %
    • Bandwidth (3 dB): 20 Hz to 30 kHz
    • Incidental FM: <0.3fm for internal rates and 30% AM
  • Frequency modulation
    • Deviation ranges: 100 Hz to 999 Hz, 1 kHz to 9.99 kHz, and 10 kHz to 99.9 kHz
    • Maximum deviation: Lesser of 99.9 kHz and 2fmfo above 245 MHz, or 2fm (fo + 800) below 245 MHz, where fo is in MHz; (f - 100)/3 kHz, below 0.4 MHz (fo in kHz)
    • Resolution: 3 digits
    • Bandwidth (3 dB): 0.02 kHz to 100 kHz; unspecified for fo < 0.4 MHz
    • Incidental AM: <1% AM at 1 kHz rate, for the maximum deviation or 50 kHz, whichever is less
  • Modulation source
    • Internal: 0.4 kHz or 1 kHz, ±3% for 20°C to 30°C; add ±0.1% / °C outside this range
    • External: ±5 V maximum; 1 Vpeak provides indicated modulation index. Nominal input impedance is 600 Ω
    • Modes: Any combination of internal AM, internal FM, external AM, and external FM. Modulation may also be disabled. The nominal input impedance with both external AM and external FM enabled is 560 Ω
  • Relative frequency and amplitude
  • Volts/dBm conversion
  • Store/recall memory
  • Master/slave for frequency, amplitude, and modulation step (IEEE-488 Interface controlled)
  • Flourescent display
  • 5¼ inches high, rack mountable

View Similar Listings
Hide Similar Listings

Send a Request

To: Valuetronics International Inc
Optional Fields
            
            
            

About Valuetronics International Inc

Logo of Valuetronics International Inc
Send to a Friend

Recently Viewed Products