Noisecom J7000 J7108

NoiseCom J7108-PCIX ( J7000 Series) Programmable Jitter Noise Generator, 500 MHz

Description: 

The J7000 Series instruments high crest factor output is used as a random jitter source for serial data bus applications.  The noise source is designed for the PCI-SIG total jitter (Tj) model serial data application, but can be used for any random jitter noise application. The random nature of this output is designed to model real world electrical noise commonly found in digital electrical circuits. The summing input can control signal-to-noise (SNR) or carrier-to-noise (CNR) for bit-error-ratio (BER) testing similar to other Noisecom instruments. The signal path has a nominal insertion gain of 0 dB, with very low amplitude and phase ripple.

J7108-PCIX Key Features & Specifications:

·                     Frequency Band:10 MHz - 500 MHz

·                     Power (dBm): -3

·                     Vrms: 0.16

·                     dBm/Hz: -90

·                     Flatness (dB): ±0.25 / 40 MHZ

·                     Standard Ethernet & optional GPIB Connector

Applications

·                     Rj Random Jitter Source

·                     Serial Data Testing

·                     BER, Jitter Testing

·                     Disk Drive Channel Testing

·                     PCI Express, 10 Gig E, SATA