EMI Test Receiver 20 Hz - 26.5 GHz
Unit with options:
B4 = OCXO, improved phase noise at 10 Hz carrier offset
B10 = External generator control
B24 = Internal Preamplifier 100kHz - 8GHz, gain 30dB nominal
The R&S ESU is a family of CISPR 16-1-1-compliant EMI test receivers that meet all civil and military standards for electromagnetic disturbance measurements. The R&S ESU-K53 FFT-based time-domain scan option allows users to perform overview measurements up to 1000 times faster than on standard EMI test receivers. The R&S ESU also features automatic and interactive measurement functions, parallel IF analysis and up to three detectors in parallel including the average detector with meter time constant (CISPR-Average), RMS-Average detector, and APD (amplitude probability distribution to CISPR 16).
Frequency range:
DC coupled 20 Hz to 26.5 GHz
AC coupled 10 MHz to 26.5 GHz
Frequency resolution: 0.01 Hz
Keyfacts:
Combination of CISPR 16-compliant EMI test receiver and high-end spectrum analyzer
High speed time domain scan (FFT) option
All commercial and military standards met
Internal preselection (can be switched off in analyzer mode)
Integrated 20 dB preamplifier up to 3.6 GHz as standard
Receiver mode with parallel IF analysis
Frequency scan with max. three detectors in parallel (max. 2 million test points/trace)
Second RF input (max. 1 GHz, pulse-protected)
Time-domain analysis for evaluation of timing behavior of disturbances (e.g. click-rate analysis)
Fast and reliable measurements using automatic and interactive test routines
Integrated report generator
Optional low-noise preamplifiers up to 8/26.5/40 GHz (R&S ESU-B24)
EMI test receiver:
Full compliance with CISPR 16-1-1 standard
Complex, internal preselection
(can be switched off in analyzer mode)
Integrated 20 dB preamplifier up to 3.6 GHz as standard
Integrated low-noise 30 dB preamplifier up to 40 GHz optional available
Wide choice of detectors incl. CISPR-AVG and CISPR-RMS
CISPR- and MIL-STD-compliant measurement bandwidths
User-programmable scan tables (max. 10 subranges)
Frequency scan with max. three detectors in parallel (max. 2 million test points/trace)
Second RF input (max. 1 GHz, pulse-protected)
Time-domain measurements (max. 2 million test points, measurement time ≥10 μs/point)
Fully and partially automatic measurements (preview measurement, data reduction, final measurement)
Spectrum analyzer:
Maximum dynamic range and minimum phase noise
Sweep time - for span >10 Hz: 2.5 ms to 16 000 s - for zero span: 1 µs to 16 000 s
Resolution bandwidths 10 Hz to 10 MHz in steps of 1/2/3/5
FFT, RRC and channel filters
Versatile and comprehensive evaluation facilities for lab applications (time-domain power, IP3 marker, noise/phase noise marker, channel/adjacent-channel measurements)
Wide-ranging functionality:
Correction values (cable loss, antenna transducers) automatically taken into account, user-programmable transducer sets
Saving of settings and test results on internal hard disk or via LAN or USB interface (on front and rear panels)
Modern processor technology (Celeron M, Windows XP Embedded) and networking (GPIB, LAN, USB), Remote Desktop function
Remote control via GPIB or LAN
Drivers for LabView, LabWindows/CVI, VXI Plug & Play Instrument
Compact design (weight approx. 16 kg)
€ 68,990 $82,788 (US)