Anritsu MT8222B

227 Visitors viewed Test Equipment Connection Corp. ads in the last 30 Days

The BTS Master MT8222B is a high performance base station analyzer from Anritsu. From the ground up it has been designed to support 4G standards and installed 2G/3G networks. The MT8222B platform provides a 20 MHz demodulation capability to support LTE bandwidths from 1.4 to 20 MHz. It also features a 30 MHz Zero-Span IF Output for external demodulation of virtually any other wideband signal. In addition, a Vector Signal Generator option is available for comprehensive receiver testing capability with the flexibility to generate two modulated signals plus noise.

The BTS Master MT8222B Base Station Analyzer is ideal for senior cell site technicians and RF engineers to accurately and quickly test and verify the installation and the commissioning of base stations and cell sites for optimal wireless network performance and for the on-going maintenance and troubleshooting to keep your wireless network infrastructure fine-tuned.

When it comes to meeting your key performance indicators (KPIs) such as dropped calls, call denial, or call blocking rates due to a malfunction at the cell site or interference, the BTS Master MT8222B is the all-in-one instrument that you can count on for quick problem resolution.

The Signal Analyzers for 2G/3G and approaching 4G networks can test the RF Quality and the Modulation Quality of a wireless signal to verify the performance of virtually every subsystem in a base station transmitter. With the Downlink Over-the-Air (OTA) Quality tests you can verify the performance of the downlink with the OTA scanners.

The BTS Master MT8222B is small, lightweight, and battery operated making it easy for the technician to use it anywhere at a cell site. With less than 5 minute warm-up time you get more useful battery life and you can start making measurements faster. Through the field-proven design know-how of Anritsu and 50 hours of production burn-in and temperature cycling on every unit you can count on your MT8222B to give you years of reliable performance in the rugged outdoor environment.

• 2-port Cable and Antenna Analyzer 400 MHz to 6 GHz
• Bias Tee
• GPS Receiver
• Spectrum Analyzer 150 kHz to 7.1 GHz
• Power Meter 10 MHz to 7.1 GHz
• High Accuracy Power Meter (up to 26 GHz with external sensor)
• Interference Analyzer 150 kHz to 7.1 GHz
• Channel Scanner 150 kHz to 7.1 GHz
• Vector Signal Generator 400 MHz to 6 GHz
• Signal Quality Analyzers
• GSM/EDGE, W-CDMA/HSPA+, LTE, TD-SCDMA/HSDPA
• CDMA, EV-DO, Fixed WiMAX, Mobile WiMAX
• Backhaul Quality Analyzers
• T1, T3, OC-3c
• E1, STM-1

Whether line sweeping is required or analysis of its associated components and antennas, the need to quickly troubleshoot down to a field replaceable unit (FRU) in the base station, to verify the performance of the cell site backhaul lines, or to hunt down your toughest interference problems; the BTS Master MT8222B is the ideal all-in-one instrument.

• Frequency
  • Frequency Range: 150 kHz to 7.1 GHz (usable to 0 Hz)
  • Maximum Continuous Input: +30 dBm
  • Tuning Resolution: 1 Hz
  • Frequency span: 10 Hz to 7.1 GHz including zero span
  • Sweep Time: Minimum 100 ms, 10 μs to 600 seconds in zero span
• Bandwidth
  • Resolution Bandwidth (RBW): 1 Hz to 3 MHz in 1–3 sequence ±10% (1 MHz max in zero-span) (–3 dB bandwidth)
  • Video Bandwidth (VBW): 1 Hz to 3 MHz in 1–3 sequence (–3 dB bandwidth)
  • RBW with Quasi-Peak Detection: 200 Hz, 9 KHz, 120 kHz (–6 dB bandwidth)
  • VBW with Quasi-Peak Detection Auto: VBW is On, RBW/VBW = 1
• Amplitude Ranges
  • Dynamic Range: > 95 dB (600 MHz, 3.5 GHz), 2/3 (TOI-DANL) in 1 Hz RBW
  • Measurement Range: DANL to +30 dBm
  • Display Range: 1 dB to 15 dB/div in 1 dB steps, ten divisions displayed
  • Reference Level Range: –120 dBm to +30 dBm
  • Attenuator Resolution: 0 dB to 65 dB, 5.0 dB steps
  • Amplitude Units: Log Scale Modes: dBm, dBV, dBmv, dBμV; Linear Scale Modes: nV, μV, mV, V, kV, nW, μW, mW, W, kW
• SSB Phase Noise
  • –100 dBc/Hz @ 10 kHz, 20 kHz and 30 kHz offset from carrier
  • –102 dBc/Hz @ 100 kHz offset from carrier
• Displayed Average Noise Level (DANL) with DANL in 1 Hz RBW, 0 dB attenuation, Preamp off and reference level -20 dBm
  • 3 MHz to 1.0 GHz: -137 dBm maximum, -150 dBm typical
  • > 1.0 GHz to 2.2 GHz: -133 dBm maximum, -147 dBm typical
  • > 2.2 GHz to 4.0 GHz: -133 dBm maximum, -143 dBm typical
  • > 4.0 GHz to 7.1 GHz: -130 dBm maximum, -138 dBm typical
• Third-Order Intercept (TOI), Preamp Off
  • 600 MHz: +8 dBm typical
  • 3.5 GHz: +9 dBm typical
• Second Harmonic Distortion, Preamp Off: -50 dBc maximum, -70 dBc typical
• VSWR
  • <4.0 GHz: 1:5:1 typical
  • 4.0 GHz to 7.1 GHz: 1.8:1 typical
• Smart Measurements
  • Field Strength (uses antenna calibration tables to measure dBm/m² or dBmV/m)
  • Occupied Bandwidth (measures 99% to 1% power channel of a signal)
  • Channel Power (measures the total power in a specified bandwidth)
  • ACPR (adjacent channel power ratio)
  • AM/FM/SSB Demodulation (wide/narrow FM, upper/lower SSB), (audio out only)
  • C/I (carrier-to-interference ratio)
  • Emission Mask (recall limit lines as emission mask)
  • Coverage Mapping (with option)
• Sweep Functions
  • Sweep: Single/Continuous, Manual Trigger, Reset, Detection, Minimum Sweep Time, Trigger Type, Gated Sweep (with option)
  • Detection: Peak, RMS, Negative, Sample, Quasi-peak
  • Triggers: Free Run, External, Video, Change Position, Manual
• Marker Functions
  • Markers: Markers 1-6 each with a Delta Marker, or Marker 1 Reference with Six Delta Markers, Marker Table (On/Off), All Markers Off
  • Marker Types: Style (Fixed/Tracking), Noise Marker, Frequency Counter Marker
  • Marker Auto-Position: Peak Search, Next Peak (Right/Left), Peak Threshold %, Set Marker to Channel, Marker Frequency to Center, Delta Marker to Span, Marker to Reference Level
  • Marker Table: 1-6 markers frequency and amplitude plus delta markers frequency offset and amplitude
• Limit Line Functions
  • Limit Lines: Upper/Lower, On/Off, Edit, Move, Envelope, Advanced, Limit Alarm, Default Limit
  • Limit Line Edit: Frequency, Amplitude, Add Point, Add Vertical, Delete Point, Next Point Left/Right
  • Limit Line Move: To Current Center Frequency, By dB or Hz, To Marker 1, Offset from Marker 1
  • Limit Line Envelope: Create Envelope, Update Amplitude, Number of Points (41), Offset, Shape Square/Slope
  • Limit Line Advanced: Type (Absolute/Relative), Mirror, Save/Recall
• Connectors
  • RF Out: Type N, female, 50 Ω, Maximum Input +23 dBm, ± 50 VDC, (Reflection In)
  • RF In: Type N, female, 50 Ω, Maximum Input +30 dBm, ± 50 VDC
  • GPS: SMA, female
  • T1: Bantam Jacks (with option), RJ48C (with option)
  • T3: BNC (with option)
  • E1: RJ48C and BNC (with option), RJ48C only (with option)
  • Optical Connectors: Dual LC with 9/125 μm Single Mode Fiber
  • External Power: 5.5 mm barrel connector, 12 VDC to 15 VDC, < 5.0 Amps
  • LAN Connection: RJ48C, 10/100 Mbps, Connect to PC or LAN for Remote Access
  • USB Interface (2): Type A, Connect Flash Drive and Power Sensor
  • USB Interface: 5-pin mini-B, Connect to PC for data transfer
  • Headset Jack: 2.5 mm barrel connector
  • External Reference In: BNC, female, 50 Ω, Maximum Input +10 dB
  • Reference Out: BNC, female, 50 Ω, 10 MHz
  • External Trigger In/Clock Recovery: BNC, female, 50 Ω, Maximum Input ± 5 VDC
  • IF Out: BNC, female, 50 Ω, 140 MHz