Fisher Scientific 625D

Specifications:

• Volume: 2.5 cu ft
• Chamber Dimensions: 18 x 18 x 13.5 in
• Case Material: Enamel coated Steel
• Controller Type: Microprocessor
• Temperature Range (Metric): 30 to 75°C
• Material (Internal): Stainless Steel
• Temperature Uniformity: ±0.7 at 37°C
• Display: LED
• Insulation: 3 in. Thick Fiberglass
• Material: Steel
• Resolution: 0.1°C

Description:

Incubators with gravity flow circulation provide accurate, efficient heating for routine laboratory procedures: drying and staining of slides, paraffin embedding, tissue culture work, incubation of antibody tests, microbiological determinations, crystallization studies and more. Electrical receptacle inside (5A at 120V) to plug in a stirrer, shaker or other apparatus.

Easy to operate

• Microprocessor control
• Controls are conveniently located at the top of the incubator chamber
• Keypad with arrow keys to increase or decrease set point temperature in 0.1°C increments
• Overtemperature value is automatically set at 3°C above setpoint
• PID controller comes with fixed parameters so no tuning is required
• Circuit breaker protects incubator from power surges; battery backup
• Designed to stack two units

Big three-character LED display

• Digits display actual temperature to nearest 0.1°C
• Display shows current value for set point temperature
• HEAT indicator light cycles on and off to show when incubator heaters are on
• ALARM indicator lights up if temperature exceeds overtemperature limit; backup controller maintains temperature at 3°C above setpoint; safety backup built into software

Small, medium and large workload capacities

• Available in three chamber capacities
• Mounting holes at 2 in. (5cm) intervals on the chamber walls for shelf placement
• Small incubator holds a maximum of five shelves, medium incubator holds eight, and large incubator holds eleven

Low-maintenance incubators with inner and outer doors

• Cabinet has durable, enamel-coated steel exterior
• Extruded aluminum trim has acrylic powder coating
• Chamber is easy-to-clean stainless steel
• Low-watt-density heater elements are designed for long life
• Silicone gasket on outer door and 3 in. thick (7.6cm) fiberglass insulation throughout prevent heat loss
• Outer door opens to 180° for unhindered access and features two grabber-type latches
• Inner door is tempered glass
• Steel shelves are 17.37 in. wide and 16.75 in. front-to-back (44 x 42.5cm)
• Black synthetic rubber feet keep incubator from slipping and maintain a space between incubator and benchtop for ventilation