Used Keysight Technologies (Agilent HP) 35677A for sale by Liberty Test Equipment, Inc. | used-line.com
SPECIAL OFFERS
Request Cart (0)
Watchlist (0)
Watchlist (0)
HOME Test and Measurement Test Sets S-Parameter Test Sets Keysight Technologies (Agilent HP) 35677A For Sale Keysight Technologies (Agilent HP) 35677A

Keysight Technologies (Agilent HP) 35677A

138 Visitors viewed Liberty Test Equipment, Inc. ads in the last 30 Days

Send Request
Keysight Technologies (Agilent HP) 35677A

 Add to request cart
Send to a Friend
Flag of USAEquipment Location: USA      
View Description>
Hide Description

Description of Keysight Technologies (Agilent HP) 35677A

Categories: Test Sets, S-Parameter Test Sets

Manufacturer: Keysight Technologies (Agilent HP)

Model: 35677A

Condition: Used

Seller: Liberty Test Equipment, Inc.

Keysight 35677A S- Parameter Test Set

Product specifications of Keysight Technologies (Agilent HP) 35677A (From Used-Line T&M Specifications)

  • Launch Date
  • See also 3577A, 35677B
  • Status Discontinued by Manufacturer

The HP 35677A is a 100 kHz to 200 MHz scattering parameter test set built for use with the 3577A network analyzer. Although test setups can be constructed from discrete RF components such as power dividers, directional bridges, cables, and pads, it is much easier to use a fully integrated test set such as the 35677A. The 35677A has 50 ohm test ports. This test set provides a convenient method for making reflection and transmission measurements of one- and two-port devices. The 3577A provides signal, power, and control for the test set and provides a menu that includes S-parameter softkey selections in S11, S21, S12, and S22. These are defined in terms of receiver inputs and test set direction. Changing the test set direction effectively switches the signal source and termination of the device under test as though it were removed and reconnected to the test set in the reverse direction. Different S-parameters may be selected for each of the two traces.

  • Frequency range: 100 kHz to 200 MHz
  • Test port impedance: 50 ohms
  • Directivity: >40 dB
  • Frequency response - Transmission (S21, S12): +/-1 dB
  • Frequency response - Reflection (S11, S22): +/-1 dB
  • Port match (Test ports 1, 2): >26 dB
  • Port match (Test ports 1, 2 - open/short ratio): <+/-0.75 dB magnitude and <+/-5 degrees phase
  • Port match input port: >20 dB return loss
  • Port match output ports A, B, and R: >26 dB
  • Test port isolation: >100 dB
  • Insertion loss (RF input to test port 1 or 2): 13 dB typical
  • Insertion loss (RF input to output ports A, B, or R): 19 dB typical
  • Test port reciprocity - Transmission (S21, S22): <+/-0.5 dB magnitude and <+/-5 degrees phase (typical)
  • Test port reciprocity - Reflection (S11, S22): <+/-0.5 dB magnitude and <+/- 5 degrees phase
  • Test port reciprocity - Incident power ratio (Test port 1 to test port 2): <+/-1.5 dB typical
  • RF input maximum operating level: +25 dBm
  • Rf input damage level: +/-27 dBm
  • Port 1 or 2 damage level: +/-27 dBm
  • DC bias range: +/-30 Vdc and +/-20 mA with some degradation of RF specifications typical; 200 mA damage level
  • Connectors:
    • Input port and output ports A, B, and R: 50 ohm Type N female
    • Test ports 1 and 2: 50 ohm Type N female
    • DC bias inputs: BNC female, rear panel
  • Options:
    • Front handle kit
    • Rack mounting kit
    • Front handle and rack mount kit

View Similar Listings
Hide Similar Listings

Listings similiar to Keysight Technologies (Agilent HP) 35677A

Send a Request

To: Liberty Test Equipment, Inc.
Optional Fields
            
            
            

About Liberty Test Equipment, Inc.

Send to a Friend

Recently Viewed Products